Give a boost to us! Bikerumor might earn a small fee from associate hyperlinks on this article. Be informed Extra
I believe this new BikeYoke Sagma 3-d mountain motorcycle saddle needs to shake up the trade, providing 3-d-printed give a boost to at costs lower than part what some manufacturers are charging. Leveraging the zone-specific give a boost to and squish that you’ll be able to get from 3-d-printed padding, BikeYoke calls their new Sagma 3-d “most likely probably the most at ease saddle you’ve ever ridden“. And whilst a large number of 3-d-printed saddles hover across the $300-400/300-400€ vary, BikeYoke’s maximum reasonably priced Sagma 3-d sells for simply 160€.
BikeYoke Sagma 3-d-printed saddle convenience for a lot much less
(Pictures/BikeYoke)
The brand new Sagma 3-d is the successor to BikeYoke’s already fascinating Sagma saddle. Debuted again in 2019, it introduced convenience each with slow-rebound reminiscence IDbeads foam padding and a singular tunable vibration-damping rail construction. Then in 2022, lighter variations with typical rails. I’ve ridden each rather a little on my mountain motorcycles, and recognize each BikeYoke’s selected stage of padding and the floating rail design.
Sagma 3-d 3-d-printed give a boost to construction
However now, BikeYoke says they may be able to make the Sagma even higher in 3-d… smartly with 3-d-printed padding.
Why a 3-d-printed saddle within the first position?
3-d-printed saddles are scorching at the moment. That’s most commonly for one in all two just right causes.
(Picture/Cory Benson)
The preliminary thought gave the impression to be that 3-d printing would make tradition saddles conceivable. The additive lattice development lets in designers to simply range padding density (unbiased of thickness) and thus range stage of give a boost to throughout particular person spaces of the saddle with a unmarried subject material. A saddle may also be extra inflexible and supportive below your sit down bones, whilst being extra forgiving below your cushy tissue.
However individualized padding distinctive for your personal force zones became out to be rather tricky to do on a industrial scale. Posedla has been doing it for three years with an artistic low-tech force map setup. And because final summer season, Fizik has leveraged good force sensors in motorcycle retail outlets around the globe to custom-fit cyclists on their very own bespoke saddles. However either one of the ones value nearly $500-600 / 450-500€.
Sagma 3-d give a boost to zones
Slightly extra obtainable price-wise, saddle designers merely wish to map generalized saddle force information to ascertain the separate zones for a common match. This has been the answer utilized by corporations like Bjorn, Fizik, Prologo, Selle Italia, Selle San Marco, Specialised, and most probably a couple of others. However the most cost-effective of the ones are typically round $300€ and better. I believe handiest Specialised controlled to make one as little as $200.
Now, BikeYoke provides its personal 3-d-printed zoned give a boost to at a lot more obtainable pricing.
Sagma 3-d Applied sciences
130mm or 142mm widths
The brand new BikeYoke Sagma 3-d is to be had in a large number of other configurations, all of which is able to percentage the similar 3-d-printed TPU most sensible design – simply in both 130mm or 142mm widths for the carbon-reinforced nylon shell.
BikeYoke provides the brand new saddle as usual with their Rail Suspension Design (RSD) that shall we customers mix-and-match 3 densities of shock-absorbing elastomers between saddle rails & shell to resolve how a lot flex you get. This design additionally lets in the saddle to somewhat rock side-to-side, following your frame’s movement whilst pedaling.
Or there are extra typical Lite variations of the saddle which are a little lighter with conventional rails.
Both approach you’ll be able to select steel or carbon rails.
Tech main points
3-d-printed TPU Matrix padded with closed most sensible design to forestall filth & dust accumulation
carbon fiber bolstered nylon shells
242mm lengthy total, to be had in 130mm slender or 142mm broad widths
Sagma 3-d saddles function bolt-on 7x10mm UD carbon rails or 7x10mm solid 2014-T6 aluminum rails
claimed weights: 130mm carbon at 240g, 130mm alloy at 260g, 142mm carbon at 250g, 142mm alloy at 270g
Sagma 3-d Lite saddles function 7x10mm UD carbon rails or 7mm spherical tubular chromoly rails
claimed weights: 130mm carbon at 205g, 130mm CrMo at 260g, 142mm carbon at 215g, 142mm CrMo at 270g
exchangeable rubber tags & RSD bolts upload a marginally of colour – grey, black, orange, or red
BikeYoke Sagma 3-d – Pricing, choices & availability
Sagma 3-d (l) or Sagma 3-d Lite (r)
The brand new BikeYoke Sagma 3-d saddles with rail suspension promote for $200/200€ with aluminum rails. Sagma 3-d with rail suspension and carbon rails will value you $250 / 250€. The easier BikeYoke Sagma 3-d Lite with typical rails sells for simply $160 / 160€ with chromoly rails. Or the lightest model, the Sagma 3-d Lite with carbon rails sells for $200/200€.
All of them come usual with the black rubber tag emblem. For the Lite saddles, it’s an additional 2.5€ to get a colour tag. For the rail suspension saddles, it’ll value an additional 12€ to get that contact of colour, which contains matching anodized rail attachment bolts, too.
Get all of them at once from BikeYoke now, or quickly thru their distribution companions. Possibly you’ll even select up a brand new BikeYoke Barmate handlebar with designed-in 35mm convenience like I reviewed previous this week.
BikeYoke.com
